SportPro M3

Choose Between Available Primary Components

S-Tines: A Safer Way to Go Deeper

If you have a limited amount of water in your arena or your additives require frequent mixing, the S-tines will provide holistic blending for your everyday grooming. The Sport Pro M3’s danish-styled S-tines act intuitively in synthetic footing, their springy give loosens and mixes material without causing damage to the base. S-Tines offer a safer way to go deeper, pulling up small fines and fibers that have settled to the bottom. S-tines are also suited for self-amending or self-installing additional materials, or fibers.

Scarifiers: Eliminate Unwanted Compaction

Compacted arenas with high clay will benefit from the scarifiers as the primary component. In contrast to the S-tines, scarifiers are rigid by design, giving them an enhanced ability to loosen hard, compacted materials. For arenas that would benefit from the capabilities of both, the SportPro groomer allows the operator a toolless swap out of the S-tines and scarifiers.

Coil Tines

More Contact Points for Better Blending

The SportPro M3 has two offset rows of coil tines, and each tine has two contact points instead of one. In their passive position, this setup maximizes the coil tines ability to fill in grooves and press down large fibers that have risen to the top. In the active position, the coil tines aerate, mix, and level the arena surface.

Smoothing Bar

Level Your Footing Without Plugging Up

The smoothing bar is adjustable in quarter inch increments for maximum precision adjustment. The smoothing bar allows for some build up to accumulate so it can level out any excess material while filling remaining lines or grooves. The cylinder shape of the smoothing bar allows material to flow under as well as over— creating a smoothing effect under the bar, and preventing excess material from plugging up.

Choose Between Single Roller or Dual Rollers

Twisted Rod Roller: A Signature Finish, Every Time

The twisted rod design of the SportPro roller maximizes packing and prevents trailing so you can count on an elegant finish over your arena surface. One of the key benefits of the twisted rods is constant contact with the surface, which minimizes bouncing while grooming.

Optional Front Roller: Additional Blending Capabilities and Base Protection

If you’re looking for an additional level of gauge security and consistency, you can choose to add the optional front roller. With a second roller, you’ve established a ground plane between the front and rear rollers so you can drop and groom without worrying about catching on your base.

Fully Adjustable Components

Your Arena, Your Way 

Each ground-engaging component on a SportPro M3 groomer is independently adjustable so you can configure your implement to perfectly groom your specific arena and achieve your footing performance expectations, this includes daily maintenance as well as periodic remixing. With its easy adjustment capabilities, you can change the surface tension in your arena for different disciplines and for conditioning. Once you have the groomer configured for everyday use for your arena, lock the tool in place, so you can count on consistent, repeatable results, no matter who’s in the driver’s seat. Then, adjust the components as needed into an active grooming position when you need to re-mix the additives in your footing or change the surface tension for conditioning.

Wheel Transport System

Connect-and-Go 

The wheel transport system makes it easy to connect your UTV or ATV and move your M3 in and out of your arena, hassle-free.